4mm 6MP M12 F2.0 board cctv lens with IR cut filter
4mm 6MP M12 F2.0 board cctv lens with IR cut filter
Different optical filter is optional. such as IR cut filter,bandpass filter,narrow bandpass filter
Optical Specifications
Applications
- security, surveillance
- medical
- military
- environment monitoring
- aerospace
- drone
- location based entertainment
- robot
- machine vision
- wearable
- mobile device
- 3D sensors
- IoT
- home integration
and other high-tech industries.
7 inch LCD AHD DVR monitor 1080P TVI AHD CCTV camera portable DVR
Product Introduction
all in one 7 ”AHD monitor DVR with HD record and display function is new generation product with four mixed coaxial
This product is compatible with FHDTVI, AHD and other coaxial HD specifications, can access FHDTVI, AHD, analog and audio signal. And it integrates multinomial IT high-tech.
It can achieve local HD surveillance video independently, can also be used in camera debugging and installation, and outdoor HD monitoring operations.
all in one 7 “ DVR can be widely used in security precautions and monitoring of the family, field, public security, military, medical, equipment and other areas.
Features:
l Meet FTVI, AHD signal standard specifications, support FTVI, AHD, audio 3 mixed signal access.
l Supports Smart264 encoding. Lower bit rate with same resolution; Longer recording time with same hard disk.
l Long-range coaxial cable transmission, support the maximum 800 meters TVI 1080P signal reliable transmission.
l Supports HD 5MP signal real-time preview video.
l Full view 1024×600 HD screen.
l 4x zoom monitoring
l Built-in 7000mAh large capacity battery.
l Supports 128G TF card maximum.
l Supports 10 languages.
l Supports wide voltage 5-12V input.
l Full number of channels support HD 5MP signal preview.
l Support recording files packed by time.
l Supports recording, taking photos and playback.
l Supports 12V power supply to power the camera.
l Equipped with sunshade: to see the screen clearly in the sun.
Technical Characteristics:
|
Items |
Value |
|
|
Display |
Resolution |
1024 X 600 Pixel |
|
View angle |
Full view 170 ° |
|
|
Brightness |
300 cd per square meter |
|
|
Video |
Video input |
FHDTVI,AHD,Analog signal |
|
Video transmitting range |
800 meters for TVI 1080P signal |
|
|
Video delay time |
<0.1s |
|
|
Power output |
12V 300MA |
|
|
Video LED control output |
LED On/Off |
|
|
Video Storage Pixels(16:9) |
1920* 1080 |
|
|
Video compress |
H.264 |
|
|
Video storage Format |
AVI |
|
|
Audio |
Audio Frequency Range |
20HZ-20KHz AAC |
|
Audio Compression Format |
AAC |
|
|
Photo |
Photo storage Format |
JPG 5.0 mega: 2560(H)×1920(V) |
|
Storage |
External SD card |
TF Card 2-128GB (Optional) |
|
128GB Recording time |
18-60 hours |
|
|
Operating System |
PC |
Windows & Mac OS |
|
Port |
USB 2.0 |
|
|
Language |
Language |
Multiple |
|
Power |
Working voltage |
DC: 5-12V |
|
Working Current |
2A |
|
|
Battery |
Built-in Li Battery |
7000mAh |
|
Working time |
≥4hours |
|
|
Dimension: (LxWx H) |
DVR main part |
118mm x 66mm x 17mm |
|
DVR main part |
160 gram |
|
Product details of 7 inch TVI AHD tester:
7 inch LCD AHD DVR monitor 1080P CVI TVI AHD
Package includes:
1 x 7 inch CVI TVI AHD tester
1 x Power adapter
1 x User manual
1 x Package color box
7 inch LCD AHD DVR monitor 1080P CVI TVI AHD
7 inch LCD AHD DVR monitor 1080P CVI TVI AHD
7 inch LCD AHD DVR monitor 1080P CVI TVI AHD
7 inch LCD AHD DVR monitor 1080P CVI TVI AHD
7 inch LCD AHD DVR monitor 1080P CVI TVI AHD
7 inch LCD AHD DVR monitor 1080P CVI TVI AHD
700TVL Color Mini CCTV Camera Video Security Camera with Microphone 1/3\” Sony Color CCD 3.7mm Pinhole Lens”
Key Features:
1/3” Sony Color CCD
700TVL
Mini Size: 30x30x10mm
Microphone Built-in
Minimum Illumination: 0.8 Lux
3.7mm Pinhole Lens Built-in
DC12V Power Input
Bracket Included
Parameters:
| Model |
MT-MBSN731H-N |
|
| Signal System |
NTSC |
PAL |
| Image Sensor |
1/3” SONY Effio Color CCD |
|
| System Synchronization |
2:1 Interlace |
|
| Effective Pixels Number |
NTSC:976(H)x494(V) |
PAL:976(H)x582(V) |
| Horizontal Resolution |
700 TV Lines |
|
| Electronic Shutter |
1/60(1/50)-1/100000Sec |
|
| Audio Input |
1x Microphone |
|
| Audio Output |
1x RCA |
|
| Video Output Level |
1.0 Vp-p (75Ω, Composite) |
|
| Gamma Correction |
>0.45 |
|
| S/N Ratio |
More than 52dB (AGC Off) |
|
| Lens |
3.7mm Pinhole Lens |
|
| Sync System |
Internal, L.L |
|
| Min. Illumination |
0.8 LUX/F1.2 |
|
| BLC |
Auto |
|
| White Balance |
Auto |
|
| AGC |
Auto |
|
| Day/Night |
Auto |
|
| Power Voltage |
DC12V±5﹪ |
|
| Power Consumption |
150mA |
|
| Operation Temperature |
﹣20℃～+50℃ |
|
| Product Dimension |
30x30x10mm |
|
| Product Weight |
37g |
|
| Package Size |
90x60x58mm |
|
| Gross Weight |
86g |
|
420TVL Color Mini CCTV Security Camera with 3.7mm Screw Button Lens and Microphone
Key Features:
1/3” Color CMOS Sensor
Video Resolution: 420TVL
3.7mm Button Pinhole Lens Built-in
Microphone Built-in
1 x Audio Input
1x Audio Output
Minimum Illumination: 1.0 Lux
DC12V Power Input
Mini Size: 20x20x9mm
Bracket Included
Parameters:
| Model |
MT-MBCM431 |
| Image Pick-up Device |
1/3” Color CMOS Sensor |
| Horizontal Resolution |
420TV Line |
| Number of Pixels |
NTSC: 512(H)x492(V); PAL: 512(H)x582(V) |
| Lens |
3.7mm Button Pinhole Lens |
| Sync System |
Internal |
| Minimum Illumination |
1 Lux/F1.2 |
| BLC |
Auto |
| White Balance |
Auto |
| Gain Control(AGC) |
Auto |
| S/N Ratio |
≥48dB |
| Gamma Correction |
>0.45 |
| Electronic Shutter |
1/50(1/60)-1/100,000Sec |
| Audio Input |
1x Mini Microphone |
| Audio Output |
1 x RCA |
| Video Output |
1x RCA |
| Power Supply |
DC 12V,150mA |
| Operation Temperature |
﹣20℃～+50℃ |
| Product Dimension |
20x20x9mm |
| Product Weight |
42g |
| Gift Box Size |
72x60x55mm |
| Gross Weight |
62g |
420TVL Mini CCTV Camera Video Security Camera with Microphone 3.7mm Pinhole Lens Size 20x20mm
Key Features:
1/3” Color CMOS Sensor
420TVL
3.7mm Screw Pinhole Lens Built-in
Microphone Built-in
Minimum Illumination: 1.0 Lux
DC12V Power Input
Mini Size: 20x20x9mm
Bracket Included
Parameters:
| Model |
MT-MBCM331 |
| Image Pick-up Device |
1/3” Color CMOS Sensor |
| Horizontal Resolution |
420TV Line |
| Number of Pixels |
NTSC: 512(H)x492(V); PAL: 512(H)x582(V) |
| Lens |
3.7mm Scew Pinhole Lens |
| Sync System |
Internal |
| Minimum Illumination |
1 Lux/F1.2 |
| BLC |
Auto |
| White Balance |
Auto |
| Gain Control(AGC) |
Auto |
| S/N Ratio |
≥48dB |
| Gamma Correction |
>0.45 |
| Electronic Shutter |
1/50(1/60)-1/100,000Sec |
| Audio Input |
1x Mini Microphone |
| Audio Output |
1 x RCA |
| Video Output |
1x RCA |
| Power Supply |
DC 12V,150mA |
| Operation Temperature |
﹣20℃～+50℃ |
| Product Dimension |
20x20x9mm |
| Product Weight |
44g |
| Gift Box Size |
72x60x55mm |
| Gross Weight |
65g |
8.25mm f/3.0 41d HFOV 16MP (No Distortion)
The 8.25mm is our newest 4K lens for compact m12 mount cameras such as the GoPro Hero 4/3+/3, DJI X3, Phantom 4/3/2 Vision (Plus+), and Yuneec CGO3+ & CGO3. With its 41 degree HFOV 16MP sharp 7 glass non-fisheye optics this lens captures the entire image sensor in perfect edge-to-edge sharpness (see example media below). Its 47mm (35mm equivalent) fixed focal point provides more than a 2X ZOOM compared to the stock DJI and Yuneec camera field of view.
No fisheye/barrel distortion means objects are naturally straight and just as your eyes see the world. While auto camera mode performs very well on cameras such as the Yuneec CGO3+ even with the 44 degree narrower FOV (2x zoom!), we recommend keeping shutter speeds at 1/500s or slower to reduce jello from the rolling shutter during full sun shooting. If the slower shutter speeds are too bright you can add our ND filters (HERE) to stop down the light.
When installing into the Yuneec Typhoon CGO3/CGO3+ cameras you will need to also purchase a new lens mount (HERE) if you have the black color stock lens mount. If you have the grey one then you can use the grey mount already in your camera. We also sell modified CGO3+ cameras (HERE) with the 8.25mm professionally installed and focused if performing the install seems too daunting of a task.
The 8.25mm lens works great when installed into a GoPro Hero 4/3+/3 and does not need a new lens mount to focus properly. Due to its small size it also does not stick out from the camera when focused thus allowing the use of the waterproof housing with the standard backdoor. Since the FOV of the 8.25mm is very narrow (3x zoom compared to stock lens) it is not recommended to be used on mounts that may transfer vibrations to it. This means that on mounts such as a 3DR SOLO drone you will not be able to use video mode with good results due to the noticeable rolling shutter issue. Photo capture, especially for surveying and panoramas is perfectly fine though if vibrations are minimized.
When installed into the Sony and Yi action cameras you can also use the waterproof housing when the 8.25mm lens is installed.
5.4mm f/2.5 60d HFOV 10MP
The 5.4mm is an optimal non-fisheye 4K lens providing a 2x narrower field of view versus a GoPro stock lens. Perfect for use on aerial platforms as its slight extra weight will not effect gimbal balance. Due to the longer Back Focal Length of this lens it is recommended you also purchase our Supermount to hold the lens more securely than the stock lens mount. A narrower lens will cause you to capture more vibrations compared to the stock lens, so make sure to use a Neutral Density Filter to slow the camera’s shutter speed and reduce image jello.
3.37mm f/2.8 87d HFOV 16MP (No Distortion)
The 3.37mm is our newest 4K lens designed for the GoPro Hero 4/3, DJI Phantom 4/3, DJI Inspire X3 and Yuneec Typhoon H CGO3+ camera lines. With its 87 degree HFOV 16MP sharp 7 glass (4G+3MO) non-fisheye optics this lens captures the entire image sensor.
Read More…
SummarySpecificationsFilter OptionsExample Media
Compared to our popular 3.97mm lens, the 3.37mm is a little wider field of view and has better edge sharpness. The flare is a little more concentrated into points instead of spread out like with the 3.97mm. The 3.37mm also has a shorter TTL, so it sticks out of the camera less. This means you can use it in the GoPro Hero 4/3 waterproof housing and the focus will not change.
After removing the stock lens the 3.37mm threads in easily. No need to change to a different lens mount and all GoPro, DJI and Yuneec accessories that mount around the lens surround are supported. No gap is present between the lens and the black GoPro lens surround as the 3.37mm lens spans the entire cavity. On the DJI cameras a small gap will be created as the lens is not as large in diameter as the stock lens, so we recommend using the original glass lens protector to keep debris out. On the Yuneec CGO3+ camera the stock lens is the same diameter so no gap or modifications to the lens surround is required with the 3.37mm lens installed.
On the GoPro Hero, we recommend using an ND4 filter (or higher) with ISO400 for full sun shooting. On the Yuneec Typhoon H we recommend keeping shutter speeds at 1/500s or slower to reduce jello from the rolling shutter during full sun shooting. If the slower shutter speeds are too bright you can add ND filters to stop down the light.
With the same f-stop as the stock lens on the GoPro, DJI and Yuneec cameras the capture software will never know the lens has been changed. Light levels will be handled as normal and depth of field will be very similar.
With it being 36 degrees narrower than the stock GoPro lens, 3 degrees narrower than the DJI Inspire X3 and Phantom 4/3 cameras and 11 degrees narrower than the Yuneec H CGO3+ camera, this lens brings your subjects closer without being too zoomed in to introduce unwanted image jitter.
1.21mm f/2.0 220d HFOV 16MP
The 1.21mm is specifically designed for stitching together with other 1.21mm cameras to create interactive 360 degree media. With its 16MP 12 glass super-wide angle optics you can capture high resolution interactive media that will stay sharp as you pan around your scene. Minimum 2 cameras for 360 degree mono vision, 4 cameras for stereo 3D. Includes plastic lens cap. See interactive 360 degree example videos and camera mounts below. Purchase Kolor stitching software HERE.
Don’t want to worry about sending you camera in to be modified? We sell new cameras with this lens installed HERE.
Model Number
GP12120
Focal Length
1.21mm
35mm Equivalent
6.90mm
Fish-eye Distortion
Yes (Fisheye)
Black Vignetting
NO
Weight (Stock Lens = 5.5g)
20g
Angle of View (V*H*D)
220 x 220 x 220 degrees
Aperture (f Stop)
2.0
Back Focal Length (BFL)
3.95mm
Dimensions (Diameter x Length)
25 x 25.75mm
Native Camera Sensor Support
1/2.3″
Native Megapixel Support
16MP
Thread Material
Metal
Optics Material
Glass
Fits in GoPro Waterproof Case?
No
Case Mod Needed?
N/A
Dust Ring Included?
Yes (DR_A + DR_B)
